Wine
Fermentation Tank strictly follows the pressure vessel (GB150-2011) and
"steel welding atmospheric vessel" (NB/T 47003.1-2009) requirements
for the design, manufacture and acceptance..
Wine Fermentation Tank use
vertical circular tank body, the top is standard conical head,and top of tank
body is equipped with dimple jacket which can be pumped in the cooling medium
for circulating cooling; The lower of tank set mesh , filtering effect is
better; the bottom is 60 ° ~ 90 °
inclination of conical head .It is not only good for wine liquid to bi-directional flow fast fermentation, but
also is conducive to discharge yeast and impurity; At the bottom of the tank
set mixing slag agitator used in the fermentation process and discharge
process.
Tank Optional
Configuration
Wine
Fermentation Tank optional configuration: thermometer (digital display type or
dial), sanitary manhole, in-outlet, sterile sampling valve, drain valve, level
gauge, and liquid level self-control system (bearing module, non-contact
ultrasonic, static pressure transmitting device), etc., or configured according
to customers’ requirements.
Feature
• Wine
Fermentation Tank has 10m3, 19m3,25m3, and other specifications, according to
the requirement of customers.
• Jacket can be put into chilled water (or
cooling water), jacket adopts dimple jacket; Jacketed outside is covered with
insulation layer, insulation material is PU (keep cold).
• Connector uses tri-clamp, inner tank
uses SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm~0.6μm. Outer
surface can be polished, wiredrawn ,sandblasted according to customer's
requirement.
Application
• Suitable for red wine fermentation .