Description
Material:
Tools: tool steel.
Protective insert: PETP.
Protective cap: AlSi1MgMn.
Version:
• Protective caps for open-ended spanners 7 / 8 / 10 / 13 / 16 / 18 and 24 mm
• Protective inserts for ring spanners 7 / 8 / 10 / 13 / 16 / 18 and 24 mm
• Protective inserts for sockets 7 / 8 / 10 / 13 / 16 / 18 and 24 mm
• Spanners and sockets designed for the inserts and caps
• Socket wrench ½“ length 275 mm
• Socket wrench ½“ length 199 mm
• Extensions ½“ lengths 248 mm, 76 mm and 45 mm
• Swivel extension ½“ length 46 mm
• Universal joint ½“ length 70 mm
• Tommy bar ½“ length 298 mm
Note:
Tool set with ½“ drive and protective insert specially designed for tightening and loosening screw connections with sensitive surfaces - see article No. 300-101 and 300-201.
Apart from a complete set of protective caps and inserts, the tool case naturally also contains the matching special tools. To complete the set normal drive and aid tools are also included.
All parts are set into a special moulding and prevented from falling out when the case is opened. The case itself can be fully opened to 180° so that all tools and parts are immediately available. It is also immediately realised if all protective inserts are available in adequate amounts or if they must be specifically reordered.
Application:
Fastening of surface sensitive nuts and screws for hygienic areas. Additionally, soiling due to contact corrosion is reliably prevented.
Also for other sensitive visible parts on automobiles and motorbikes and in the sanitary branches.
On request:
Other AF sizes, tools and protective inserts for ¼“ drive.
Attention:
To prevent contact corrosion the tools should not be used with normal steel fasteners.
English
简体中文
