Year of Manufacture: 1998
Condition: Good
Availability: Immediate
Sold Status: For Sale

Krauss Maffei KM 175 24-Cavity PET Preform Injection Moulding system, year 1998 – consisting of :

* Krauss Maffei KM 175-1900 CV Preform Injection Moulding machine
– Machine Voltage / Amp / Frequency : 400 V / 354 A / 50 Hz
– Pump Motor : 44.4 kW @ 60 Hz

* Piovan DS 428 Resin Dryer
* Fasti MSP 20C Mould Dehumidifier

* 24 Cavity Hot Runner

One of the following moulds would be included with the machine :

* Mould Option 1 :
– 24 Cavity Mould, conversion kit, gripper plate, and EOAT for producing 100.5 mm long PCO1810 21.5, 25 & 27 gm preforms PCO1810 Thick Neck 29 gm preforms
Cycle Times / Outputs are-
PCO1810 21.5 gm : 13.2 sec / 6,500 PPH
PCO1810 25 gm : 15.4 sec / 5,600 PPH
PCO1810 27 gm : 16.6 sec / 5,200 PPH
PCO1810 Thick Neck 29 gm : 17.3 sec / 5,000 PPH

* Mould Option 2 :
– 24 Cavity Mould, conversion kit, gripper plate, and EOAT for producing 125 mm long 30 and 36 gm preforms in PCO1810 and Alaska Neck Finishes
Cycle Times / Outputs are-
PCO1810 30.5 gm : 14.9 sec / 5,800 PPH
PCO1810 36 gm : 16.5 sec / 5,200 PPH
Alaska 30 gm : 14.9 sec / 5,800 PPH
Alaska 35.5 gm : 16.5 sec / 5,200 PPH

Mould Option 3 : 24 Drop Mould, conversion kit, gripper plate, and EOAT for producing 133 mm long PCO1810 42 & 48 gm preforms PCO1810 Thick Neck 48 gm preforms
Cycle Times / Outputs are-
PCO1810 42 gm : 18.2 sec / 4,800 PPH
PCO1810 48 gm : 21.5 sec / 4,000 PPH
PCO1810 Thick Neck 48 gm : 20 sec / 4,300 PPH

Note : Machine can also be sold without the moulds

Machine is in average to good condition, can be seen in production until mid December 2015.

• 
  Krauss Maffei KM 175-1900 CV