For Low Viscosity In-Line System Applications
Model KV100 is a user-friendly capillary viscometer which operates excellent in rough process 

environments, on downgraded set-ups at pilot plants, as well as under semi-laboratory conditions.

The KV100 Capillary Viscometer easily measures low and medium viscosity materials. Based on the 

principle that the pressure decrease between the two ends of the measuring capillary is proportional 

to viscosity a permanent control signal is determined.

FEATURES AND BENEFITS

·Continuous measurement eliminates need for "Grab" sampling and allows for prediction and constant 

control of final product properties
·The gear pump forced internal sample flow via magnet coupling keeps the instrument resistant to 

pressure and temperature
·4-20 mA output signal provides a variety of display and control capabilities
·Sample transport by aspiration tube into the viscometer creates bypass situation where measurement 

"Zone" is protected from main flow, allowing accurate, repeatable measurement under variable 

conditions
·Availability of various standard viscosity ranges up to 500 mPas (cP); customized ranges on 

request
·Display device for measuring data including calculation options

SPECIFICATIONS

Viscosity Range: 0 to 500 mPas (cP)
Temperature: -25°C to +140°C
Maximum Pressure: 25 bar (360 psi)
Input Power: 230 V AC, 50/60 Hz; 24 V DC
Output: 4 - 20 mA

OPTIONS

·ATEX approved design for explosion-proof requirements
·Mounts in-line supported by stainless steel flow chambers with customized flange connections
·Special synthetic material-based flow chambers for small pipe diameters or tube connections
·Flange for tank or container mounting
·Temperature compensation of viscosity reading