CIP cleaning device that does not break down as production equipment, and methods of operation can be simple and safe automatic cleaning system, was introduced to almost all food, beverage and pharmaceutical factories.

CIP cleaning device can not only clean the machine, but also to control the microbial cleaning method.

CIP cleaning device it has the following advantages:
1, allows the rationalization of production plans and increase production capacity.
2, compared with the hand, not only because the operator does not affect the cleaning effect of the differences, but also to improve the quality of their products.
3, the cleaning operation to prevent the risk of labor-saving.
4, can be energy-efficient cleaning agents, steam, water and production costs.
5, can increase the life of machine parts.
6, CIP cleaning device sub-manual, semi-automatic and fully automatic three kinds to choose from.

Purpose and scope:
The product pipeline for the dairy materials and containers in situ cleaning equipment, also apply to breweries, beverage plants and a food plant materials, pipes and equipment cleaning.
The cleaning fluid delivery device using centrifugal pipeline materials and equipment in the container for forced circulation to reach the purpose of cleaning. Therefore, without the pipeline, the disintegration of the device can improve equipment utilization, reduce labor intensity. Therefore, this product is an advanced cleaning process equipment.
The specific use of this equipment, and workers must plant equipment and piping, and the combination of cleaning and matching top.
Main structure and working principle:
This equipment mainly consists of acid-base fluid tank, clean tank, rack, cleaning fluid dispenser and pump and other components sent
1 acid, lye tank and clean water tank
Three storage tanks used for storing cleaning fluid, cleaning process requirements can be prepared in accordance with cleaning fluid composition, concentration, and by acid, lye tank of steam heating coil, the cleaning fluid can be heated to the required temperature, tank is a pressure vessel, made of stainless steel plate, barrel body thermometer equipment, barrel up and down with back and output interfaces. The top two holes and cleaning fluid inlet, the bottom also has a condensate outlet and waste outlet, clear water out of the sink device and export only, no return mouth, rinse with water is a one-time emissions. The discharge pipe emissions and could no longer return to the acid, lye, in acid, lye between the tank and clean the sink. Acid-base fluid and waste water emissions in the tank connection pipe at the bottom left, open with a cover, seal the round nut, can achieve emissions.
Splitter and sent through a cleaning fluid over the external, may form a cycle of cleaning fluid return line system.
2 Rack: This rack is made of stainless steel materials, bearing in addition to cleaning liquid distributor sent all outside agencies, so that the device compact.

Technical Parameters